Home Inspection Service Chicago Suburbs | Condo Inspection Chicago Suburbs - Talk Now Home Inspection Service Chicago Suburbs | Condo Inspection Chicago Suburbs - Live Help
//
Detecting a failing Septic System

How Long Should a Septic System Last?

You can expect a conventional septic system, such as that being described here, to last about 30 years. Some systems last much longer and some systems can fail earlier for reasons like those noted above. Other things can also affect the life of a septic system. For example, a system may have been providing satisfactory service for a previous owner for many years, only to fail shortly after you have bought the house. If the previous owners were a working couple with no children, the system was probably not heavily used; if yours is a family of six, the added load could push a marginal system over the edge and into failure.

What are the Signs of a Failing Septic System?

Sewage backup into the home is one possible sign of a failing system. However, backup can also be simply the result of a blockage somewhere between the house and the septic tank (this is relatively easy to fix).

Another possible sign of failure is a smell of sewage outside the house. If this smell is more noticeable after a lot of water has been put into the system - multiple showers or several loads of laundry (if the laundry waste discharges into the septic system), for example - this may be an indication that the leach field is failing. The smell may also be accompanied by a "spongy" feeling in some areas of the leach field, near the distribution box, or near the septic tank.

The "spongy" feel may be caused by water and waste being pushed to or near ground level. If ponding water is also seen, this is called "breakthrough" and is an almost positive indication of failure of one or more parts of the system. This smell, however, can also originate at the plumbing vent. In either case, further investigation is warranted.

Dye Testing: If you see such signs, a dye test may confirm your suspicions. For this test, a special strong dye is put in the system - usually by flushing it down the toilet. A significant amount of water is then washed into the system.

If there is "breakthrough", the dye will become visible on the ground surface. If the dye is seen on the surface, this would be a very strong indication that the system has failed. Your Home Inspector, a licensed professional engineer, or a septic system contractor can usually perform this test for you if it is needed.

 


  • Home Inspection Service Chicago Suburbs | Condo Inspection Chicago Suburbs - Slide 1
    Compliments of


    ECHO Home Inspection Inc.

  • Home Inspection Service Chicago Suburbs | Condo Inspection Chicago Suburbs - Slide 3


  • Home Inspection Service Chicago Suburbs | Condo Inspection Chicago Suburbs - Slide 1